Evaluation of a microwave method for dry matter determination in faecal samples from weaned pigs with or without clinical diarrhoea

Microwave drying as a procedure for determination of faecal dry matter in weaned pigs was evaluated and clinical relevant cut-off values between faecal consistency scores were determined. Repeatability and reproducibility were evaluated. Overall coefficient of variation was 0.03. The 95% confidence limits for any future faecal subsample examined by any operator in any replica were ± 0.85% faecal dry matter. Robustness in relation to weight of wet faeces was evaluated. The weight categories were 0.5, 1.0, 1.5, 2.0 and 3.0 g. Samples of 0.5 g gave significantly different mean faecal dry matter content compared to weighing of 1.0-3.0 g. Agreement with freeze-drying was evaluated. Lin's concordance correlation coefficient was 0.94. On average the faecal dry matter values was 1.7% (SD=1.99%) higher in freeze dried compared to micro waved samples. Non-parametric ROC analyses were used to determine optimal faecal dry matter cut-off values for clinical faecal consistency scores. The 4 consistency scores were score 1=firm and shaped, score 2=soft and shaped, score 3=loose and score 4=watery. The cut-off values were score 1: faecal dry matter content >19.5%, score 2: faecal dry matter content ≤ 19.5% and >18.0%, score 3: faecal dry matter content ≤ 18.0% and >11.3%, score 4: faecal dry matter content ≤ 11.3%. In conclusion, the microwave procedure has an acceptable repeatability/reproducibility and good agreement with freeze drying can be expected. A minimum of 1.0 g of wet faeces must be used for analyses. Faecal dry matter cut-off values between 4 different clinical consistency scores were determined.     

Growth and mineral nutrition of cattails inhabiting a thermally‐graded south carolina reservoir: II. The micronutrients 1

Micronutrient uptake by two species of cattail, Typha latifolia and T. domingensis, in a thermally‐stressed South Carolina lake was determined throughout a growing season. Plants of the same age class were sampled from shoot emergence in early spring to shoot senescence in late fall. The uptake pattern varied according to the element, season, and for some elements, thermal regime. In addition, interspecific differences in uptake were observed, with higher elemental concentrations usually occurring in T. latifolia shoots. In both species, Zn and Fe tended to accumulate in the rhizomes, whereas Mn and B accumulated in shoots. Copper concentrations were equivalent in both shoots and rhizomes. Zinc was the only micronutrient to demonstrate a consistent decrease in shoot concentration in bothspecies early in the growing season followed by a gradual decline or leveling off in concentration over the rest of the season. The other micronutrients exhibited inconsistent uptake patterns. Iron was the only micronutrient to exhibit consistent enhanced effects due to temperature elevation throughout the growing season. In general, larger variabilities were observed in micronutrient uptake than in macronutrient uptake.     

Measurement of genetic and environmental variation in barley (Hordeum vulgare) grain hardness

In this study, we assessed a broad range of barley breeding lines and commercial varieties by three hardness methods (two particle size methods and one crush resistance method (SKCS—Single-Kernel Characterization System), grown at multiple sites to see if there was variation in barley hardness and if that variation was genetic or environmentally controlled. We also developed near-infrared reflectance (NIR) calibrations for these three hardness methods to ascertain if NIR technology was suitable for rapid screening of breeding lines or specific populations. In addition, we used this data to identify genetic regions that may be associated with hardness. There were significant (p<0.05) genetic effects for the three hardness methods. There were also environmental effects, possibly linked to the effect of protein on hardness, i.e. increasing protein resulted in harder grain. Heritability values were calculated at >85% for all methods. The NIR calibrations, with R² values of >90%, had Standard Error of Prediction values of 0.90, 72 and 4.0, respectively, for the three hardness methods. These equations were used to predict hardness values of a mapping population which resulted in genetic markers being identified on all chromosomes but chromosomes 2H, 3H, 5H, 6H and 7H had markers with significant LOD scores. The two regions on 5H were on the distal end of both the long and short arms. The region that showed significant LOD score was on the long arm. However, the region on the short arm associated with the hardness (hordoindoline) genes did not have significant LOD scores. The results indicate that barley hardness is influenced by both genotype and environment and that the trait is heritable, which would allow breeders to develop very hard or soft varieties if required. In addition, NIR was shown to be a reliable tool for screening for hardness. While the data set used in this study has a relatively low variation in hardness, the tools developed could be applied to breeding populations that have large variation in barley grain hardness.     

Detection of ribosomal RNA genes by chemiluminescence inSolanum tuberosum L.: a rapid and non-radioactive technique for the characterisation of potato germplasm

Summary The characterisation of potato germplasm is important for the exploitation of this crop, and DNA techniques are playing an increasingly important role as valuable tools in the evaluation of agronomic characters. The rapid, non-radioactive detection of the ribosomal RNA gene fragments which identify restriction fragment length polymorphisms (RFLPs) in two cultivars ofSolanum tuberosum L. is described.     

Phosphorus accumulation and leaching risk of greenhouse vegetable soils in Southeast China

Over-fertilization has caused significant phosphorus(P) accumulation in Chinese greenhouse vegetable production(GVP) soils. This study, for the first time, quantified profile P accumulation directly from soil P measurements, as well as subsoil P immobilization, in three alkaline coarse-textured GVP soil profiles with 5(S5), 15(S15), and 30(S30) years of cultivation in Tongshan, Southeast China. For each profile, soil samples were collected at depths of 0–10(topsoil), 10–20, 20–40, 40–60, 60–80, and 80–100 cm. Phosphorus accumulation was estimated from the difference in P contents between topsoil and parent material(60–100 cm subsoil). Phosphorus mobility was assessed from measurements of water-soluble P concentration(PSol). Finally, P sorption isotherms were produced using a batch sorption experiment and fitted using a modified Langmuir model. High total P contents of 1 980(S5), 3 190(S15), and 2 330(S30) mg kg~(-1) were measured in the topsoils versus lower total P content of approximately 600 mg kg~(-1) in the 80–100 cm subsoils. Likewise, topsoil PSol values were very high, varying from 6.4 to 17.0 mg L~(-1). The estimated annual P accumulations in the topsoils were 397(S5), 212(S15), and 78(S30) kg ha~(-1) year~(-1). Sorption isotherms demonstrated the dominance of P desorption in highly P-saturated topsoils, whereas the amount of adsorbed P increased in the 80–100 cm subsoils with slightly larger P adsorption capacity. The total P adsorption capacity of the 80–100 cm subsoils at a solution P concentration of0.5 mg L~(-1) was 15.7(S5), 8.7(S15), and 6.5(S30) kg ha~(-1), demonstrating that subsoils were unable to secure P concentrations in leaching water below 0.5 mg L~(-1) because of their insufficient P-binding capacity.     

湿地松与加勒比松杂种第一和第二代木材基本密度比较

从湿地松×洪都拉斯加勒比松Ｆ１和Ｆ２各１５个家系中取样,测定和分析其木材基本密度发现,Ｆ１和Ｆ２木材全木芯基本密度的总平均值间没有显著差异,木材密度的变幅Ｆ２比Ｆ１的略大,而幼龄材与成熟材的基本密度之间的差异Ｆ２比Ｆ１小。     

Genetic differentiation among Atlantic salmon reared in sea‐cages reveals a non‐random distribution of genetic material from a breeding programme to commercial production

Seven samples, each consisting of approximately 50 Atlantic salmon, were collected from five marine farms in Norway. These farms reported to rear fish originating from the same commercial breed; however, all samples followed a unique route of production from breeder to marine farm via egg, fry and smolt producers. A group of farmed escapees (n=50) were also captured. Following genotyping with 18 microsatellite loci, the global F_ST was 0.083, and pair‐wise values were as high as 0.158. Four clusters, with varying degrees of genetic differentiation, were identified among samples from the farms, and the source of the escapees was identified successfully. It is suggested that the genetic differences observed among samples from the farms were created through the process of genetic drift, facilitated by parallel sub‐strains, extensive within‐strain selection and low to moderate numbers of adults contributing to batches of eggs. In conclusion, this study has demonstrated that genetic identification of escaped Atlantic salmon, back to the farm of origin, may be possible even when farms rear fish reported to originate from a single breeder.     

Effects of irrigation strategies and soils on field grown potatoes: Yield and water productivity

Yield and water productivity of potatoes grown in 4.32 m² lysimeters were measured in coarse sand, loamy sand, and sandy loam and imposed to full (FI), deficit (DI), and partial root-zone drying (PRD) irrigation strategies. PRD and DI as water-saving irrigation treatments received 65% of FI after tuber bulking and lasted for 6 weeks until final harvest. Analysis across the soil textures showed that fresh yields were not significant between the irrigation treatments. However, the same analysis across the irrigation treatments revealed that the effect of soil texture was significant on the fresh yield and loamy sand produced significantly higher fresh yield than the other two soils, probably because of higher leaf area index, higher photosynthesis rates, and “stay-green” effect late in the growing season. More analysis showed that there was a significant interaction between the irrigation treatments and soil textures that the highest fresh yield was obtained under FI in loamy sand. Furthermore, analysis across the soil textures showed that water productivities, WP (kg ha⁻¹ fresh tuber yield mm⁻¹ ET) were not significantly different between the irrigation treatments. However, across the irrigation treatments, the soil textures were significantly different. This showed that the interaction between irrigation treatments and soil textures was significant that the highest significant WP was obtained under DI in sandy loam. While PRD and DI treatments increased WP by, respectively, 11 and 5% in coarse sand and 28 and 36% in sandy loam relative to FI, they decreased WP in loamy sand by 15 and 13%. The reduced WP in loamy sand was due to nearly 28% fresh tuber yield loss in PRD and DI relative to FI even though ET was reduced by 9 and 11% in these irrigation treatments. This study showed that different soils will affect water-saving irrigation strategies that are worth knowing for suitable agricultural water management. So, under non-limited water resources conditions, loamy sand produces the highest yield under full irrigation but water-saving irrigations (PRD and DI) are not recommended due to considerable loss (28%) in yield. However, under restricted water resources, it is recommended to apply water-saving irrigations in sandy loam and coarse sand to achieve the highest water productivity.